Current opportunities
We currently have no postdoctoral research positions available, however, we are open to applications for fellowships.
Novel particle acceleration based on wakefield accelerators driven by shaped laser pulses
Supervisor: Professor Zulfikar Najmudin
Type: Experimental (but requires simulation / computation)
Funding: JAI studentship
Laser wakefield accelerators are being investigated for the next generation of particle accelerators. A high intensity laser pulse generates a large amplitude plasma wave, which can accelerate particles at a rate more than thousands of times faster than conventional accelerators. Acceleration of electrons sourced directly from the plasma is now well established with wakefield accelerators with acceleration to greater than GeV energies routinely performed in our experiments [1,2].
Early experiments suffered from lack of reproducibility and lack of control on the laser properties. However, a new generation of high-power laser sources are now being developed with greater control on the spatial and temporal characteristics of the pulses, and which operate at high repetition rates (10 Hz to kHz). These laser sources offer the ability to greater control on the accelerating process offering the ability to improve in real-time and to use machine learning techniques to implement optimisations [3]. In particular, shaping of the laser pulse on time scales shorter than 10 fs will offer the ability to enhance injection of plasma electrons and to match the acceleration length to the length over which the laser energy is spent.
The work will be performed using the high-power lasers at national and international facilities such as the SYLOS laser at ELI-ALPS, the ASTRA lasers at the Rutherford-Appleton Laboratory as well as with the laser being developed in the basement of the Blackett Laboratory.
[1] S.P.D. Mangles, et al, "Monoenergetic beams of relativistic electrons from intense laser-plasma interactions", Nature. 431 535–538 (2004)
[2] S. Kneip et al, “Near-GeV Acceleration of Electrons by a Nonlinear Plasma Wave Driven by a Self-Guided Laser Pulse”, Phys. Rev. Lett. 103 035002 (2009)
[3] R.J. Shalloo, et al, “Automation and control of laser wakefield accelerators using Bayesian optimization”, Nat. Commun. 11 6355 (2020)
Discharge plasmas as a medium a collider based on wakefield accelerators
Supervisor: Professor Zulfikar Najmudin
Type: Experimental (will include simulation work)
Funding: JAI studentship
Wakefield accelerators use the immense fields produced in plasmas to accelerate particles to high energy. Energy gains > GeV are now routinely produced at laser facilities around the world over only centimetre distances [1]. However, the relatively low energy available in even the most powerful laser pulse is a limitation on the particle’s energy gain. By contrast the ion beams available at CERN have energy that exceeds 10’s of kJ (if not more). This means that instead of accelerating particles over centimetres, there is the potential to accelerate over tens, if not hundreds of metres [2]. This would produce an accelerator relevant to high-energy physics experiments [3].
The AWAKE experiment at CERN has already produced exciting results using the SPS beam demonstrating 2 GeV energy gain of electrons in a 10 m cell [4]. To overcome the fact that the SPS beam is too long to ideally drive a wakefield, a process called self-modulation has been used to produce beamlets within the SPS beam that are resonant with a wakefield [5]. This is initiated in a Rb cell by a laser that ionises the plasma as the proton beam is passing through it. However, the use of the ionising laser puts a limit on the acceleration length.
We have proposed (along with IST Lisbon) using a discharge plasma that would enable acceleration lengths well in excess of the 10m available now. But for controlled acceleration the plasma density must be controlled to better than 1%, and it may be further necessary to have ramps in plasma density to optimise the acceleration process. Hence, in this project, we will look to diagnose and model the generation of large scale (metre long) plasmas, using the prototype discharge we have here in the Blackett Lab. We will also model the interaction of the SPS proton beam with our accelerator stage. We will then look further to optimise the plasma profile to improve the acceleration. These investigations will be performed with a view to implementing both the discharge and the diagnostics on future runs of AWAKE at CERN.
[1] S. Kneip, et al, “Near-GeV Acceleration of Electrons by a Nonlinear Plasma Wave Driven by a Self-Guided Laser Pulse”, Phys. Rev. Lett. 103 035002 (2009)
[2] A. Caldwell, et al, “Proton-driven plasma-wakefield acceleration”, Nat. Phys. 5 (2009) 363–367.
[3] M. Wing, “Particle physics experiments based on the AWAKE acceleration scheme”, Philos. Trans. R. Soc. A Math. Phys. Eng. Sci. 377 (2019)
[4] E. Adli, et al, “Acceleration of electrons in the plasma wakefield of a proton bunch”, Nature. 561 363 (2018)
[5] M. Turner et al, “Experimental Observation of Plasma Wakefield Growth Driven by the Seeded Self-Modulation of a Proton Bunch”, Phys. Rev. Lett. 122 054801 (2019)
Imaging of shock compressed material for application in inertial confinement fusion
Supervisor: Professor Zulfikar Najmudin
Type: Experimental (but will include simulation work)
Funding: JAI studentship
The recent announcement of positive energy gain in an inertial confinement fusion has generated great excitement around the world [1] [2]. These results suggest that we are at the dawn of being able to control fusion in the laboratory, and potentially opening it up as a new source of (carbon-free) energy. These results were made possible by meticulous improvements in capsule design and better understanding of the power balance between laser beams to ensure more uniform irradiation of the capsule being compressed. However, the results to-date still suffer from shot-to-shot fluctuation (with only one shot showing positive energy gain so far?). Most of the difficulties in the compression have been a result of lower-than-expected velocities for the laser-driven shocks that initiate the compression, which has only been inferred from the poor neutron yields in previous shots. Being able to diagnose and characterise the shock formation and velocity would be a major step in better controlling the inertial confinement process [3].
We have been developing new x-ray imaging techniques for characterising dense matter interaction with high temporal and spatial resolutions. This source is based on synchrotron radiation from laser wakefield accelerators. The same large fields that make wakefield accelerators much more compact than conventional accelerators, also make them emit synchrotron radiation strongly. The source, with its small temporal and spatial emission size, and high photon energy (> 10 keV) is ideal for diagnosing dense dynamic systems [4]. We propose to use this imaging source to better understand the coupling of laser energy to a variety of targets in direct-laser driven targets as would be found in high-gain ICF designs. We will also study methods to improve laser-matter coupling which could drive the implosions much faster making the capsules potentially much easier to ignite.
[1] [Online]. https://www.bbc.co.uk/news/science-environment-63950962
[2] [Online]. https://www.llnl.gov/news/national-ignition-facility-achieves-fusion-ignition
[3] A. Do et al “Direct Measurement of Ice-Ablator Interface Motion for Instability Mitigation in Indirect Drive ICF Implosions, Phys. Rev. Lett. 129 215003 (2022)
[4] J. C. Wood et al, "Ultrafast Imaging of Laser Driven Shock Waves using Betatron X-rays from a Laser Wakefield Accelerator," Scientific Reports, vol. 8, p. 11010, 2018.
Radiation pressure acceleration of thin foils with intense lasers
Supervisor: Professor Zulfikar Najmudin
Type: Experimental (will include simulation work)
Funding: JAI studentship
State-of-the-art lasers can now reach intensities well in excess of 1024 Wm-2 at focus. When directed onto a target that is sufficiently dense that it can stop the laser beam, the intense radiation pressure can directly drive the critical density surface of the target. For sufficiently thin targets, the whole plasma can be propelled forward gaining momentum as it propagates driven by the radiation pressure, resulting in the production of a dense beam of energetic ions [1]. However previous results have demonstrated that imperfections in either the driver beam or the targets can lead to instabilities that terminate the acceleration [2]. The results can be further complicated by early heating of the target which causes it to expand to such a level that the density falls below the relativistically corrected critical density such that the laser propagates into the target at high intensity. Luckily though, we have recently found that this too can lead to efficient ion acceleration [3]. These ions could have numerous applications, not least as part of a next-generation particle accelerator for radiobiology and oncology [4]. This is motivated by recent discovery of the so-called ‘FLASH’ effect, showing improved healthy tissue sparing at ultrahigh dose rates, which is well suited to laser driven sources.
Recent advances in high-power lasers, which offer higher beam quality at much higher repetition rates (>10 Hz), will allow us to do real-time improvements in both targetry and laser beam shape to optimise the interaction, potentially using machine learning techniques. This will give the ability to accelerate high quality beams to much higher energies. Hence, this project aims to develop radiation pressure driven acceleration schemes through novel ultrathin targets and through better control of the drive laser properties.
The experiments will take place firstly on our in-house laser in Blackett but will then be migrated to higher power national facilities such as Gemini at the Rutherford-Appleton Laboratory and J-Karen at KPSI in Japan.
[1] A.P.L. Robinson, et al, “Radiation pressure acceleration of thin foils with circularly polarized laser pulses”, New J. Phys. 10 013021 (2008)
[2] C.A.J. Palmer et al, “Rayleigh-Taylor Instability of an Ultrathin Foil Accelerated by the Radiation Pressure of an Intense Laser”, Phys. Rev. Lett. 108 225002 (2012)
[3] N. Dover et al, “Enhanced ion acceleration from transparency-driven foils demonstrated at two ultraintense laser facilities”, Light Sci. Appl. (2022).
[4] G. Aymar et al., “LhARA: The Laser-hybrid Accelerator for Radiobiological Applications”, Front. Phys. 8, 567738 (2020)
Long scale plasmas for AWAKE proton driven plasma acceleration experiment
Supervisor: Professor Zulfikar Najmudin
Type: Experimental (will include simulation work)
Funding: JAI studentship
Plasma-based accelerators can sustain acceleration gradients orders of magnitude higher than conventional devices, thereby enabling more compact accelerators to be developed. Plasma wakefield acceleration (PWFA) driven by high energy proton beams is one of the most promising schemes for electron acceleration to 100 GeV or TeV energies, as required for particle physics applications and next-generation colliders [1]. This is being investigated by the AWAKE project at CERN, which uses 450 MeV proton beams from the Super Proton Synchrotron (SPS) to drive a wakefield in a 10 m plasma cell. This experiment has so far demonstrated wakefield growth [2] and electron acceleration by 2 GeV [3].
In order to reach the higher energies needed for a particle collider, a discharge plasma source (DPS) that can be scaled up to ~100 m is being developed in collaboration between CERN, Imperial College and IST, Lisbon. The versatility of the DPS has been demonstrated using a 10 m source at CERN, including its scalability and use of different mass ions as the plasma source. The 1 m DPS that we have at Imperial will enable the outstanding measurements and improvements of uniformity and reproducibility to be made.
This project aims to develop suitable methods to measure, control and optimise a DPS for use in PWFA. This includes designing and implementing improvements to the DPS electronics, developing longitudinal and transverse diagnostics to determine the uniformity of the plasma and modelling the interaction between the SPS proton bunch and the DPS to determine optimal plasma profiles. The project will be based at Imperial with opportunities to travel to CERN to implement the findings. This PhD is suitable for Physics or Engineering students, but funding is only available for UK applicants. All applications should be received by the 16th August.
[1] Caldwell, A., Lotov, K., Pukhov, A. et al. Proton-driven plasma-wakefield acceleration. Nature Phys 5, 363–367 (2009). https://doi.org/10.1038/nphys1248
[2] Turner, M. et al. (AWAKE Collabortion). Experimental observation of plasma wakefield growth driven by the seeded self-modulation of a proton bunch. Phys. Rev. Lett. 122, 054801 (2019). https://doi.org/10.1103/PhysRevLett.122.054801
[3] Adli, E., Ahuja, A., Apsimon, O. et al. Acceleration of electrons in the plasma wakefield of a proton bunch. Nature 561,363–367 (2018). https://doi.org/10.1038/s41586-018-0485-4
LhARA, the Laser-hybrid Accelerator for Radiobiological Applications
Supervisor: Professor Kenneth R Long
Type: Blend: experimental, simulation, algorithm development
Funding: STFC/JAI, possibility to join CERN Doctoral Student Programme
We are leading the Laser-hybrid Accelerator for Radiobiological Applications, LhARA. This is a novel facility optimised to serve a systematic programme of radiobiology and is a step towards a transformation of clinical practice of particle beam therapy. The technologies that are envisaged for LhARA are required to deliver, for example, the nuSTORM neutrino source and PRISM – the proposed successor to COMET.
Through your PhD you would contribute to one of the critical R&D topics in LhARA. Possible PhD programmes include the:
- Execution of a set of measurements on laser-driven proton and ion sources to validate the numerical modelling that underpins the conceptual design of LhARA;
- Development of a second prototype of the strong-focusing electron-plasma lens and the characterisation of this prototype using a variety of beams;
- Development of ion-acoustic dose mapping; a novel, non-invasive real-time dose-profile measurement system; and
- The development of a novel ‘Fixed Field Accelerator’ to boost the laser-driven beams to high energy.
You will have the opportunity to work with world-leading experts from CERN, STFC Daresbury and Rutherford Laboratories (ASTeC, CLF, ISIS, PPD), the Institut Curie (Paris), and leading UK universities. LhARA is the flagship initiative of Imperial’s multidisciplinary Centre for the Clinical Application of Particles (the CCAP).
Time Resolved X-Ray Spectroscopy using Laser Wakefied Accelerators
Supervisor: Professor Stuart Mangles
Type: experimental with computional modelling
Funding: JAI/STFC
This PhD project will research the use of X-Rays produced by laser wakefield accelerators for ultrafast time-resolved absorption spectroscopy.
The project will develop X-Ray absorption methods for the UK's new EPAC laser fascility and will provide insights into the potential of laser wakefied accelerators for a range of of applications, including time-resolved studies of dynamic processes in material systems, detection of ultrafast electronic dynamics, and matter in extreme conditions.
Development of a plasma lens for Laser hybrid Accelerator for Radiobiological Applications (LhARA) with an advanced computational approach
The UKRI CDT Artificial Intelligence Machine Learning and Advanced Computing (AIMLAC) is offering a fully funded PhD scholarship to work on the LhARA plasma lens. More information can be found on https://www.swansea.ac.uk/postgraduate/scholarships/research/physics-ukri-cdt-aimlac-phd-development-2023-rs197.php
Contact us
Telephone:
+44 (0) 20 7594 7655
Email: Group Administrator
Postal Address:
John Adams Institute
1013 Blackett Laboratory
Department of Physics
Imperial College London
South Kensington Campus
London, SW7 2AZ, UK